	Accusquare Table Saw Rip Fence


		Pictured here is our standard M1025 fence system installed on a standard 10" contractor style saw.

The Accusquare Table Saw Rip Fence is the perfect aftermarket fence if you're serious about saving time and keeping your lines straight. The Accusquare was designed to be that dependable piece of equipment in your workshop that you can trust every time you use it. It takes a simple, no-frills approach that gets the job right every time. And fewer mistakes on your cut line means you're saving time and money.

Mule Table Saw Rip Fences

M-1025 25" Rip Fence

Reg Price: $239.00 Now Only 199.00

Rip Capacity: 10” left - 25” right

Length of Rail: 48” Front - 42” Back

Guide Rail: 2 1/2” x 2 1/2” x 35”

	M-1040 40" Rip Fence		Reg Price: $ 259.00 Only $209.00
	Rip Capacity: 10” left - 40” right
	Length of Rail: 60” Front - 54” Back
	Guide Rail: 2 1/2” x 2 1/2” x 35”

Table Saw Accessories

	M21 (new)		Reg Price: $ 64.00 25% off Now Only $35.00
	Mitre Gauge Fence
	Simple way to extend your crosscutting...
	>> details

ACCUSQUARE RIP FENCE SYSTEM

Few things in a woodworker's arsenal of tools are as dependable and powerful as a table saw. Unfortunately the standard fence installed on many table saw's leave much to be desired. Unless you purchased a high end saw, your rip fence might be the first thing to go. After all, if you're spending your time re-measuring your cut-line your losing productivity and possibly wasting some material. A dependable fence doesn't have to cost allot, it simply needs to perform, day in and day out - no mater what the job.

Installing the Accusquare fence is straight forward and simple. It doesn't have any pulleys, pads, or cords that can get in the way when you're working or wear out over time.

The Accusquare is all about precision and durability, it's manufactured using precision interlocking CNC machined parts. The sturdy aluminums frame sits snug on your table and features a dual - hairline cursor for quick alignment and straight cuts every time you use it.

In fact, we are so sure of the versatility and quality of the Accusquare Table Saw Rip Fence, we've even put it in writing. Gold Standard Warranty

Features & Specifications

Unique Design
Three T-slots located on the three exposed sides of the fence guide rail make the Accusquare Fence System the most versatile fence system available. It has the ability to accept facer boards for higher support, sacrifice boards for dadoing , hold downs and feather boards for safer sawing and a wide variety of available jigs or jigs of your own creation.

	Twist & Lock Our twist and lock system will hold the fence firmly in position without causing distortion to the fence parts. C.N.C machining of our locking device and metal to metal contact when locked up, allow for less pressure to hold the fence in place. The system is so strong it will never wear down, wear out or get sloppy causing unwanted drift.
	When you lock an Accusquare in place that’s where it stays! You can use standard square nuts to attach jigs and boards to your fence without a lot of trouble and expense. We provide some with the fence to get you started.

Easy Action
The Accusquare Fence is easily adjusted to your blade or miter slot and once parallel, that’s where it will stay. The “spring loaded” locking device keeps the fence parallel as you move it across your saw. When you move our fence it will not flop around, when you lock it up it does not have to square itself, it’s already there!

Dual Hairline Cursor
For the ultimate in accuracy, our dual hairline cursor will give you the most accurate fix on a measurement. No other system will give you this kind of accuracy, including most of the micro adjusts systems. Line up the hairlines with your measurement and you can site without deviation. The cursor is easily adjusted to compensate for the different blades you may use on your saw.

Measuring tapes, made to our specifications, have the dual scale printed on the bottom and a hardwearing coating over top. Our tapes are designed to work with quality hand held tapes such as Lufkin, Stanley and Starrett, so that the measurement you take and the one you set on your fence will be the same. Measure and cut with precision that’s what Accusquare is all about.

---

Top of page


Will it fit my table saw?

The Accusquare easily installs on these makes: Craftsman, Delta, Jet, Grizzly, Powermatic, Rockwell, General, King, Shopsmith, Hitachi, Skil & Beaver. If your table saw manufacturer was not listed, and want to know if the Accusquare will fit your saw, please call us toll free 1-877-684-7366 Installation is straight forward and a simple. "Absolutely the best fence on the market. Installation instructions were perfect and I had it up and working in about an hour." Mr J. Miriello We do have adapters available to assist in installation on some of the older model saws and saws that do not have tops thick enough to accept aftermarket fences. Toll free assistance is always available: 1-877-684-7366 ---
	Top of page


Gold Standard Warranty and Guarantee

	Each Mule Cabinetmaker product is warranted for the life against defects in material or workmanship and we will replace any defective part, free of charge, for as long as you own the product. We are so confident in the quality and usefulness of our products, we offer an unconditional money back guarantee. If for any reason you are unsatisfied with your Mule-Accusquare product, just notify us within 90 days of purchase and you'll receive a full refund upon return of your product. This warranty does NOT cover abuse, neglect or damage caused by fire or theft.
		Top of page


Order Information

	No Frills Policy Our prices reflect the cost of the product and it's distribution. Factory direct is our main source of distribution and reflects considerably lower prices than our competitors...not lower quality. All orders are shipped within 24 hours via UPS ground to the 48 States. Some smaller items and orders for Alaska, Hawaii and Puerto Rico will be shipped by mail and some extra time may need to be allowed for these shipments. For your convenience you may also order by: Phone: 1-877-684-7366

Mule: Table Saw Rip Fence - Router Table - Bandsaw Fence